| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Suspension Control System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001NKY002X |
| Title: SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL SUSPENSION CONTROL ECU
(a) Install the suspension control ECU with the bolt.
Torque: 8.5 N·m (87 kgf·cm, 75 in·lbf)
(b) Connect the suspension control ECU connector.
2. INSTALL SUSPENSION CONTROL ECU (w/ AVS)
(a) Install the suspension control ECU with the 3 bolts.
Torque: 8.5 N·m (87 kgf·cm, 75 in·lbf)
(b) Connect the suspension control ECU connector.
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH
4. INSTALL REAR FLOOR MAT SUPPORT PLATE
5. INSTALL ROPE HOOK ASSEMBLY
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
7. INSTALL REAR DOOR SCUFF PLATE LH
8. INSTALL REAR FLOOR STEP NO. 2 COVER
9. INSTALL REAR FLOOR STEP NO. 1 COVER
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH
11. INSTALL DECK BOARD BRACKET
12. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
13. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
14. INSTALL ROPE HOOK ASSEMBLY
15. INSTALL LUGGAGE COMPARTMENT TRIM BOX
16. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|